Mechanical seal Eagle Burgmann EA560 rubber bellow design for
Standard size: 8-50mm or 0.375”-2.0”
Seal ring: Car, Sic, Ssic, Ceramic, TC
Secondary seal: NBR, EPDM, Viton etc.
Spring and metal parts: 304, 316, HAST.C
KL-E560 is self-adjusting to shaft misalignments and deflections.
The length of the contact area of the bellows with the shaft is an
optimum compromise between ease of assembly (less friction) and
sufficient adhesive force for torque transmission.
Wildly used in water,chemical,oil industrial
1. If the products we have in store, we will send it out ASAP after
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex,
TNT, UPS will be normal ways. If you require use of a courier,
please inform us in advance.
KALUSEAL specialized in designing and making mechanical seals which
replace the original products such as Burgmann, John Crane, AES,
Chesterton, Flowserve, Depac, Roten, Vulcan, Flygt, Lowara, Hilge,
Grundfos, Alfa Lval and other OEM mechanical seal.
We also supply repair service:
Fixing and Applying Directions of Mechanical Seals
1) Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2) The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
3) The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4) When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5) When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
6) Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
7) Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict